Rail Systems

Max. 600 kg

Stepless servo-controlled asynchronous motor

65 kg

Manoeuvring is done by using a patented manoeuvring handle or balancing mode. Both options sense the operator’s hand/arm movement and give a very exact and smooth speed control.
Only a small force is needed to engage the up/down motion. When the operator lets go of the handle, the up/down motion is immediately stopped.

230V, 50-60 Hz, 1-phase with ground protection, 10A

1,4 meters

The QLR 600i can be mounted in most common rail systems.
Existing rail systems can often be used.

End effectors are designed to fulfill customer’s requirements.
Intelligent I/O signals are available for optimum function.

The control box is included in the price.
External handle must be purchased separately and are available in different lengths for ergonomic handling.

Max. 50 kg

Stepless servo-controlled asynchronous motor.

25 kg

Manoeuvring is done by using a patented manoeuvring handle or balancing mode. Both options sense the operator’s hand/arm movement and give an exact and smooth speed control.
Only a small force is needed to engage the up/down motion. When the operator lets go of the handle, the up/down motion is immediately stopped.

230V, 50-60 Hz, 1-phase with ground protection, 10A.

2.7 meters

The QLR 50i can be mounted in most common rail systems.
Existing rail systems can often be used.

Customized end effectors are designed to fulfill customer’s requirements.
Intelligent I/O signals are available for optimum function.

- Parking brake
- Stop-and-Go System
- Mounting bracket for pin diameter 16 mm.
For more available options, see document: Options

Max. 300 kg

Stepless servo-controlled asynchronous motor

43 kg

Manoeuvring is done by using a patented manoeuvring handle or balancing mode. Both options sense the operator’s hand/arm movement and give a very exact and even speed control.
Only a small force is needed to engage the up/down motion. When the operator let go of the handle, the up/down motion is immediately stopped.

230V, 50-60 Hz, 1-phase with ground protection, 10A

2.7 meters

The QLR 300i can be mounted in the most common rail systems.
Existing rail systems can often be used

End effectors are designed to fit customer’s need.
Intelligent I/O signals are available for optimum functionality

- The color of motor unit that deviates from the standard.

For available options see document: Options

Max. bending moment 350 Nm at gripper base

Stepless servo-controlled asynchronous motor

43 kg

Manoeuvring is done by using a patented manoeuvring handle or balancing mode. Both options sense the operator’s hand/arm movement and give a very exact and smooth speed control.
Only a small force is needed to engage the up/down motion. When released, it stops immediately.

230V, 50-60 Hz, 1-phase with ground protection, 10A

2.7 meters

The QLRT 350s can be mounted in the most common rail systems. Existing rail systems can often be used.

End effectors are designed to fit customer’s need.
Intelligent I/O signals are available for optimum functionality.

- A brake system is available as option and is recommended.
- Color of motor unit that deviates from the standard.

For available options see document: Options

Max. 125 kg

Stepless servo-controlled asynchronous motor

Three asynchronous motors

Set in motion by using a patented control handle and rope angle sensors. Both sense the operator’s hand/arm movement and give a very exact and even speed control. The rope drifts from the vertical line when the load is guided horizontally. The motor starts and follows in the same direction as the rope. The maximum horizontal speed is 1m/sec.
Furthermore, only a small initial force is needed to engage the up/down motion of the control handle.
When released, it stops immediately.

400-480V, 50-60 Hz, 3P+N+E, 16A 3P+N+E (16A)

2.7 meters

Maximum width of work area 9,0 m.
Total width of trolley = work area + 1,5 m.

Rails made of anodized aluminum

Rails for X-movement can be mounted on floor pillar, wall or ceiling brackets.
Max. c/c x-rails 4,5 m.
Max. c/c supports in x-direction 4,5 m.

End effectors are designed to fit customer’s need.
Intelligent I/O signals are available for optimum functionality.

Easy accessible USB communication in handle as standard

- Color on motor unit that deviates from standard

For more available options, see Document: Options

Max. 300 kg.

Stepless servo-controlled asynchronous motor

Three asynchronous motors

Manoeuvring is done with Binar Quick-Lifts patented manoeuvring handle and wire angle sensors. Only a small force is needed to engage the up/down motion.

The equipment also follows the operator’s movement horizontally.

Horizontal movements of the load make the lifting wire deviate from its vertical line. The drives then start and move in the same direction as the wire has deviated from its vertical line. One (1) meter per second, is the maximum speed horizontally.

400-480V, 50-60 Hz, 3P+N+E, 16A

2.7 meters

Maximum width of work area 9,0 m.
Total width of trolley = work area + 1,5 m.

Rails made of anodized aluminum

Rails for X-movement can be mounted on floor pillar, wall or ceiling brackets.
Max. c/c x-rails 4,5 m.
Max. c/c supports in x-direction 4,5 m.

End effectors are designed to fit customer’s need.
Intelligent I/O signals are available for optimum functionality.

- Color of motor unit that deviates from the standard

For more available options, see document: Options

Quick-Lift Drive 125i (QLD 125i)

- The parking function is activated or deactivated by a single pushbutton on the control unit
- The function remains active until the operator changes the function
- Places the QLD 125i in the desired stationary position without physical constraints for the operator

Three brakes
- Two brakes at the fixed rails in the X-direction and one at the right of motion in the Y-direction

- The parking function setting is activated and deactivated using a single button on the control unit
- Stops the end effector at the desired position
- Ergonomic beneficial for operator by minimizing rapid brakes
- Provides increased security and prevents the control unit from wandering away

Quick-Lift Rail 125i (QLR 125i)

- Preprogrammed work radius where the brakes are automatically activated
- The halting function for required positions in the Y direction is installed and generated by means of a laser detector.
- Halting times and radii stops are programmed in the iLab 2

Three brake units: Two at the fixed rails in the X direction, and one brake attached above the QLR motor unit for the Y direction.
A pneumatic steering box

- Highly increased efficiency
- Better ergonomics for the operator through reduced braking force.
- Adaptable for the required working radius and braking points.

Max. 200 kg

Stepless servo-controlled asynchronous motor

43 kg

Manoeuvring is done by using a patented manoeuvring handle or balancing mode. Both options sense the operator’s hand/arm movement and give a very exact and even speed control.
Only a small force is needed to engage the up/down motion. When the operator let go of the handle, the up/down motion is immediately stopped.

230V, 50-60 Hz, 1-phase with ground protection, 10A

2.7 meters

The QLR 200i can be mounted in the most common rail systems.
Existing rail systems can often be used.

End effectors are designed to fit customer’s need.
Intelligent I/O signals are available for optimum functionality.

- Color of motor unit that deviates from the standard.

For more available options, see document: Options

Max. 125 kg

Stepless servo-controlled asynchronous motor

28 kg

Manoeuvring is done by using a patented manoeuvring handle or balancing mode. Both options sense the operator’s hand/arm movement and give a very exact and smooth speed control.
Only a small force is needed to engage the up/down motion. When the operator lets go of the handle, the up/down motion is immediately stopped.

230V, 50-60 Hz, 1-phase with ground protection, 10A

2.7 meters

The QLR 125i can be mounted in most common rail systems. Existing rail systems can often be used.

End effectors are designed to fulfill customer’s requirements.
Intelligent I/O signals are available for optimum function.

- Parking brake
- Stop-and-Go System
- Mounting bracket for pin diameter 16 mm.

For more available options, see documents: Options